The K-type prefabricated house built by the K-type prefabricated house is mainly because of the slope top, so the wind resistance is stronger, and it can resist wind above level 8. The K-type prefabricated house is also an economical prefabricated house with light steel structure as the skeleton and color steel sandwich panel as the enclosure. The K-type prefabricated house is combined in space according to the standard modulus, and the components are connected by bolts, which can be carried out conveniently and quickly. Assembling and disassembling, the temporary construction standard passed, economical and fast construction concept was realized. However, when using the mobile room, in order to ensure the safety of the mobile room, it needs to be reinforced.

Reinforced with load. Reinforcement under load is convenient, economical and practical. It is mainly used when the component stress is less than 80% of the steel design strength, or when the component damage is relatively light. In order to allow the new reinforcement to participate in the force, it is necessary to take temporary measures for the reinforced rod. Unloading measures.

Unloading reinforcement. Unloading reinforcement is suitable when the structural damage is large or the stress state of the components and connections is high, and the load needs to be temporarily reduced.

Foundation reinforcement. Foundation reinforcement is suitable for severe structural damage or too small bearing capacity of the original section. Temporary supports must be installed on the ground for reinforcement or renewal, so that the replaced components are completely unloaded, and the safety of the entire structure after the replaced structure is removed Sex.

Partial reinforcement. Local reinforcement is the reinforcement of a rod or connection node with insufficient load-bearing capacity. There are methods of increasing the section of the member, reducing the free length of the member and the method of reinforcing the connection node.

Comprehensive reinforcement. Comprehensive reinforcement is the reinforcement of the overall structure. There are two types of reinforcement methods that do not change the static calculation graphics of the structure and those that change the static calculation graphics of the structure.

There are many ways to strengthen the prefabricated house. In order to ensure the firmness of the prefabricated house, it is necessary to adopt a suitable reinforcement method to strengthen the prefabricated house. In addition to mastering the technology of reinforcement of the K-type prefabricated house, manufacturers can also build prefabricated houses of different styles and sizes according to the requirements of customers.