In daily life, container houses should be relatively rare, but in factories, it is widely used, so what are the requirements for customizing container houses? Although the correct method of each engineering team is different, the conditions are similar, which is also one of the acceptance criteria. What issues should be paid attention to when customizing container houses? There will be a detailed introduction in the article, you can take a look.
What issues should be paid attention to when customizing container houses?

1. Product size

Customers measure the length, width and height according to the size of their products, and the size requirements for Erdos container mobile homes should be large rather than small. When measuring the volume of a product, the measurement unit is generally accurate to centimeters. The smaller the error, the better, and the larger the size, the higher the cost may be. 2. Load-bearing requirements for the box

Customers must first weigh the weight of their products, so that they can choose a suitable material for the Erdos container activity room to bear the weight of the product.

3. Does the equipment need to dissipate heat in time?

Whether the equipment needs to dissipate heat in time involves the requirements for the bottom plate of the cabinet, how the cabinet exhausts and dissipates heat, and so on. If exhaust and heat dissipation are required, it is necessary to weld or install louvers and exhaust fans. The specific location depends on the placement of the equipment in the box.

4. Do you need decoration?

Because the Erdos container mobile home may involve staff entering and leaving the box, most customers will propose simple decoration of the box. The back door of the container body is opened to facilitate the entry and exit of equipment, and the anti-theft door is installed on the front.

5. Is it necessary to install wires?

Generally speaking, wire installation is not necessary, but customers need to consider whether wire installation is required according to product characteristics. Generally, the cabinet will design the inlet and outlet ports under the cabinet, and the waterproof problem will also be considered at the cable outlet.
What are the conditions for customizing a container house?

1. It can be quickly loaded and unloaded, and can be directly and conveniently changed from one means of transportation to another.

2. It has a volume of 1 cubic meter or more.

3. Transshipment on the way does not need to move the goods in the box, it can be directly reloaded.

4. It is convenient for filling and unloading of goods.

5. It can be used repeatedly for a long time and has sufficient strength.