In daily life, the container house should be relatively rare, but in the factory, its application is quite extensive, so what conditions do you need to customize the container house? Although the correct method for each engineering team is different, the conditions are similar, which is also one of the acceptance criteria. What problems should be paid attention to when customizing the container house?

What problems should be paid attention to when customizing the container house?

1. Product size

Customers should measure the length, width and height according to the size of their own products. When measuring the volume of a product, the unit of measurement is generally accurate to centimeters. The smaller the error, the better. The larger the size, the higher the cost may be.

2. The load-bearing requirements of the box

Customers must first weigh the weight of their products, so that they can choose the Ordos container prefab of suitable materials to bear the weight of the products.

3. Whether the equipment needs to be dissipated in time

Whether the equipment needs to be dissipated in a timely manner involves the requirements for the bottom plate of the box and how the box is ventilated and dissipated. If you need to exhaust and dissipate heat, you need to weld or install shutters and exhaust fans. The specific location depends on the placement of the equipment in the box.

4. Does it need to be renovated?

Because the Ordos container prefab may involve staff entering and leaving the box, most customers will propose simple decoration of the box. The rear door of the Ordos container is opened at the back end of the box to facilitate the entry and exit of equipment, and the front side is installed with an anti-theft door.

5. Does it need to be installed?

Generally speaking, wire installation is not necessary, but customers need to consider whether wire installation is required according to product characteristics. Generally, the inlet and outlet of the box are designed under the box, and the waterproof problem will also be considered at the cable outlet.

What are the requirements for a custom container house?

1. It can be quickly loaded and unloaded, and can be directly and conveniently changed from one means of transport to another.

2. It has a volume of 1 cubic meter or more.

3. Transshipment on the way can be directly changed without moving the goods in the box.

4. It is convenient for filling and emptying of goods.

5. It can be used repeatedly for a long time and has sufficient strength.